Categories

Owatrol Corrosive Inhibiting Primer (CIP)

Owatrol Corrosive Inhibiting Primer (CIP)

USD35.52 USD40.14
(You save USD4.62)
(No reviews yet) Write a Review
SKU:
SAW-322013
UPC:
9330420128819

Description

Owatrol Corrosive Inhibiting Primer (CIP) completely seals sound underlying metal. This product adheres to surfaces even with minimal preparation.

  • Suitable as a primer with any coating including high solvent finish.
  • Deep penetration of material - may be used on new or rusted metal to form a solid stable layer that other coatings can firmly adhere to.

SURFACE PREPARATION

  • Remove all loose & flaking rust; scale and old paint back to a sound surface/ edge.
  • Surfaces exposed to chemicals (acids,alkalis or salt deposits) should be washed using copious amounts of water or steam cleaned.
  • Severely contaminated surfaces should be cleaned using an appropriate solvent.
  • Ensure surface is clean, dry and free of any oil or grease.

APPLICATION

  • Stir or shake can well before and during use. Do not dilute.
  • Apply 1st coat of OWATROL C.I.P. and allow to dry.
  • Apply a 2nd coat of OWATROL C.I.P. and allow to dry.
  • On severely corroded surfaces apply a 3rd coat of OWATROL C.I.P.
  • Apply finish coat after recommended time.

TIP

  • With OWATROL C.I.P., sand or shot-blasted surfaces do not require immediate priming.
  • A light rust coating will not affect its performance or the final result.

NOTE

  • Any rags soaked in OWATROL C.I.P. may spontaneously catch fire if improperly discarded.
  • Rags must be saturated with water after use or placed in a sealed, water filled metal container, before disposing with household waste.
Part NumberSize
SAW-322013 750ml
CBS-230035 2.5lt