Loading... Please wait...

Deks Olje #2 Marine Wood Varnish - Gloss

  • Gloss Deck Oil
  • Deks Olje Australia
  • Deks Olje Gloss Finish
  • Marine-grade Varnish
  • Timber Varnish  - Deks Olje
  • Deks Olje Online
  • Deks Olje
RRP:
USD30.37
Your Price:
USD27.33 (You save USD3.04)
SKU:
230020
Weight:
1.200 KGS


Product Description

Gloss Deks Olje is a penetrating oil that can be used as an alternative to marine varnish. It penetrates deep into the heart of the wood for a rich, natural & long-lasting finish.

Available in a range of sizes, gloss finish Deks Olje keeps wood in pristine condition and protects it with powerful fungus and rot inhibitors.

Deks Olje weathers but will not lift. With a periodic touch-up, Deks Olje Marine Varnish will give many years of service without the need to strip back to bare wood.

Surface Preparation

  1. Apply Deks Olje #1 carefully, following directions.
  2. Use Deks Olje #2 anywhere above waterline and below deck.

NOTE: Deks Olje #2 may be too slippery for a deck, so many boaters prefer protecting traffic decks with Deks Olje #1 only.

Application over Deks Olje #1 treated surface

  1. Use a good varnish brush, roller or foam brush.
  2. Apply five or six coats (one per day).
  3. Do not apply in damp conditions.
  4. For the smoothest finish, lightly wet sand with Deks Olje #1 and #600 grit paper between coats 5 and 6.
  5. Allow good air circulation for drying.

Maintaining Deks Olje #2 Finish

  1. Once each year, lightly wet sand using Deks Olje #1 and #600 paper. Wipe dry and apply one new thin coat of Deks Olje #2.
  2. During the season, lightly wet sand abraded areas as in step 1 and touch up with one or two coats of Deks Olje #2.
  3. Keep finish free of salt by rinsing with fresh water when possible.
  4. NO NEED to remove the original Deks Olje #1 and Deks Olje #2.

Coverage

No more than 12 square metres per litre.

Clean-up

  1. Brushes and rollers can be cleaned with Mineral Turpentine.
  2. A rag soaked in paint thinner will clean adjacent surfaces while Deks Olje #1 and Deks Olje #2 are still wet.
  3. Dried spills must be removed with paint and varnish remover. Some are available specifically for fiberglass.

Storage

Deks Olje #2 should be stored in containers which are completely filled to avoid "jelling" DO NOT FREEZE.


Find Similar Products by Category


Write your own product review

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!





GST is added at checkout for Australian orders only. | © 2018 Classic Boat Supplies ABN 55 313 626 855 | Privacy Policy