Polished bronze horn cleats (also know as pillar cleats) with a centre lead for positive location of rope tails.
These attractive bronze cleats are very popular on a wide range of vessels. Available in a range of sizes, choose between polished bronze or a chrome-plated finish.
Note that the smallest (62mm) cleat has a solid base - there is no centre lead gap.
|SKU||Cleat Length||Base Length||Base Width||Hole Centres||Centre Lead Hole||Max Height||Fastenings||Davey Code|
|020101||2-1/2" (62mm)||1-1/4" (28mm)||1/2" (13mm)||15mm||None||12mm||6g Screws||1084/GM/062|
|020102||4" (100mm)||2-1/8" (55mm)||7/8" (22mm)||31mm||20mm x 9mm||TBC||1084/GM/100|
|020103||5" (125mm)||2-5/8" (67mm)||1" (25mm)||43mm||28mm x 11mm||30mm||1084/GM/125|
|020104||6" (150mm)||3" (77mm)||1" (27mm)||47mm||30mm x 13mm||35mm||1084/GM/150|
|020105||7" (175mm)||3-1/4" (82mm)||1-1/4" (32mm)||50mm||32mm x 14mm||50mm||1084/GM/175|
|020106||8" (200mm)||3-1/2" (90mm)||1-3/8" (36mm)||56mm||40mm x 15mm||TBC||1084/GM/200|
|020107||10" (250mm)||4" (100mm)||1-5/8" (40mm)||63mm||45mm x 20mm||60mm||1084/GM/250|
This product was received within the promised time frame. It is well done and appears too beautiful to bolt down onto the deck of my old boat.
First class except for one bolt hole which was slightly askew. The 14G bronze bolts appeared slightly proud on insertion but sank flush when fully tightened. I had to make my own back-plates from some old bronze strips I had spare. To save tarnishing and a lifetime of future polishing I used Wattyl Clear Lacquer (spraycan) to finish off.
Delivery was very fast to the Sunshine Coast (overnight, actually).
Regards - David
Received this the other day for the restoration of my pirate. Beautiful piece of hardware. The bronze from classic boat supplies is top notch. I've purchased several pieces.
Very nice product
Very pleased with transaction
HAPPY AS A CLAM ON HIGH TIDE!
Wicket great service
Extremely happy with the cleats I purchased. They set off the classic lines of my recently completed canoe perfectly.
I tried a plastic cleat first but it just didn't look right.
This bronze horn cleat is for a halyard cleat on the front of the mast and so is quite visible.
The polished bronze cleat looks much better than the plastic and much more in-keeping with the boat.
High quality finish