This elegant welded bronze ring fitting is unleathered. Leathererd mast travellers are also available.
The traveller hooks through a loop on the yard (gaff) and slides up and down the mast as the mainsail is hoisted. The ring stays approximately horizontal under load and thus slides with little friction.
A mast traveller should not jam during hoisting and lowering of the sail. When tension is on the halyard the ring is held in a horizontal plane, or at least at right angles to the line of the halyard. The ring itself does not have to be too strong since it is the halyard that is taking most of the load when sailing.
The internal diameter of the ring should be approximately 20 percent larger than the mast diameter to allow for free movement.
|SKU||Mast Diameter||Traveller Ring ID||Ring Gauge||Hook Gauge|
|320262||2-3/4" (70mm)||3-5/8" (90mm)||1/4" (6mm)||5/16" (8mm)|
|320263||3-1/4" (80mm)||4" (100mm)||1/4" (6mm)||5/16" (8mm)|
|320264||3-5/8" (90mm)||4-1/2" (110mm)||1/4" (6mm)||5/16" (8mm)|
|320265||4" (100mm)||TBC||5/16" (8mm)||5/16" (8mm)|
|320266||4-1/2" (110mm)||TBC||5/16" (8mm)||3/8" (10mm)|
Great looking product.