Polished bronze sailboat rudder kits suitable for medium-sized sailing boats, up to around 18 feet in length. The straps are cast in a range of widths to suit most vessels.
Made in England, this 4-piece set is beautifully cast and polished. The set consists of:
- One transom-mounted gudgeon
- One transom-mounted pintle
- One rudder-mounted gudgeon
- One rudder-mounted pintle
Chrome-plating is available at extra cost.
|Transom Brackets |
(Width x Height)
|Fastenings||Davey Part No.|
|020803||3/4" (19mm)||1-1/8" (28mm)||7/16" (11mm)||7-1/4" (185mm)||4-1/2" (105mm)||50mm x 42mm||20 x 8g||1589/GM/019|
|020804||1" (25mm)||1-1/2" (38mm)||1/2" (12mm)||7" (175mm)||4" (100mm)||105mm x 24mm||20 x 8g||1589/GM/025|
|020805||1-3/4" (44mm)||2-1/4" (54mm)||1/2" (12mm)||8-1/4" (210mm)||5" (125mm)||105mm x 24mm||20 x 8g||1589/GM/044|
|020806||2-3/16" (56mm)||2-5/8" (65mm)||1/2" (12mm)||6-1/2" (165mm)||6-1/2" (165mm)||105mm x 24mm||20 x 8g||1589/GM/056|
Excellent product BUT : The holes for the screws should be offset so the screws don't clash, I had to use copper rivets. The fittings are for 3/4" stock and screws from either side will not work.
Classic Boat Supplies - Glenn's comment is most relevant to the smallest 3/4" kit, where even short screws may touch. A solution is to rivet as Glenn has done, or to angle 3/4" screws slightly. The issue does not affect wider rudder kits which have more space.