Categories

HUTTON Winches - Geared Two Speed Standard

$1,158.47
(No reviews yet) Write a Review
SKU:
230131

Description

Quality Australian-made 2-speed standard HUTTON winches suitable as a halyard winch or sheet winch on small to large sailing boats.

This two-speed winch is manufactured with a manganese bronze or black anodised aluminium drum. The bronze winches are also available chrome-plated to suit your particular boat.

Featuring a cast bronze gear box and an all-metal textured drum, these classic winches come in three sizes (see table below).

On this winch both speeds are geared, offering more power than the single-speed ratchet and two-speed standard wnches. See the table below for gear ratios applicable to each model. The winch is produced with drum bearings and a solid metal stainless steel drive socket and shaft. The handle socket accepts a standard eight-point 11/16" winch handle.

For assistance in choosing the correct winch for your boat refer to the Australian Yacht Winch Co's winch selection guide.

Generous world-wide shipping rates are available with all HUTTON winches (minimum order value applies). Please contact us for details before ordering.

SKU Drum Diameter Base Diameter Height 1st Speed Ratio with 10" Handle / (Gear) 2nd Speed Ratio with 10" Handle / (Gear) Mounting HUTTON Model No.
230130, 230131 & 230132 3-5/16" (84mm) 6-1/4" (159mm) 5-1/2" (140mm) 14.2:1 / (2.3:1) 31.0:1 / (5.2:1) 4 x 1/4", 3-5/8" (92mm) PCD 30STDG
230133, 230134 & 230135 3-5/16" (84mm) 6-1/4" (159mm) 5-1/2" (140mm) 14.2:1 / (2.3:1) 35.0:1 / (5.9:1) 4 x 5-16",  3-13/16" (97mm) PCD 35STDG
230136, 230137 & 230138 3-5/16" (84mm) 6-1/4" (159mm) 5-1/2" (140mm) 14.2:1 / (2.3:1) 40.0:1 / (6.6:1) 4 x 5/16", 3-13/16" (97mm PCD 40STDG
230139, 230140 & 230141 3-3/8" (86mm) 6-1/2" (165mm) 6" (152mm) 13.3:1 / (2.3:1) 45.0:1 / (7.6:1) 4 x 5/16", 3-13/16" (97mm PCD 45STDG
230142, 230143 & 230144 3-3/8" (86mm) 6-1/2" (165mm) 6" (152mm) 13.3:1 / (2.3:1) 50.0:1 / (8.5:1) 4 x 5/16", 3-13/16" (97mm PCD 50STDG
230145, 230146 & 230147 3-11/16" (94mm) 7-1/4" (184mm) 7-1/2" (190mm) 14.4:1 / (2.7:1) 52.2:1 / (9.6:1) 4 x 5/16", 3-13/16" (97mm PCD 52STDG
230148, 230149 & 230150 4-1/8" (105mm) 7-9/16" (192mm) 7-3/4" (197mm) 11.6:1 / (2.7:1) 56.4:1 / (12.46:1) 4 x 5/16", 3-13/16" (97mm PCD 56STDG