Spartan Marine Hardware Manganese Bronze Chain Plate - Double Clevis Manufactured in the USA by Spartan Marine, these solid manganese bronze deck plates provide a strong mounting point for rigging. They come pre-drilled for through-bolting with four 5/16" machine screws. SKU Overall Length (C) Width Pin Diameter... $103.95 Choose Options Spartan Marine Hardware Manganese Bronze Chain Plate Made in the USA, these strong manganese bronze chain plates provide a number of options for deck-mounted rigging points on your boat. Cast and machined to accept large-diameter bolt-through fastenings for maximum strength. SKU Clevis Width Length... $49.09 Choose Options Spartan Marine Hardware Manganese Bronze Chain Plate - Lightweight Manganese bronze chain plates from Spartan Marine in the USA. These small burnished fittings provide robust deck mounting points for rigging and other purposes. They are particularly suited to shrouds and backstays. With a 1/4" clevis, these... $50.33 Choose Options Spartan Marine Hardware Manganese Bronze Combination Chain Plate $120.65 Choose Options Davey and Company Bronze Stemhead Fitting Strong cast bronze stem head fitting for loads associated with sailing dinghies up to around 18' in length. Note that this fitting is cast at an 85 ° angle and it is recommended to not attempt bending. These attractive fittings are made in... $77.51 Choose Options Davey and Company Bronze Eye Plates - Undrilled Solid bronze eye plates (or bowsprit plates) finished in either polished bronze or chrome-plated bronze. These eye plates are undrilled to allow holes to be aligned with structural members when fixing. Available in various sizes as detailed above,... $34.42 Choose Options Davey and Company Bronze Chain Plates - Undrilled Undrilled bronze chain plates (or bowsprit shroud plates) with a polished bronze finish. Cast in the United Kingdom, these beautifully made bronze shroud plates are undrilled. This allows the installer to drill holes to suit the vessel's strong points... $23.10 Choose Options Davey and Company Bronze Stemhead Fitting - Lightweight Cast bronze stem head fitting for sailing dinghies up to around 12' in length. Note that this fitting is cast at an 80° angle and it is recommended to not attempt bending. These attractive fittings are made in England and can be fastened with 4... $69.88 Choose Options Davey and Company Bronze Bow Roller Made in the UK, these quality bronze stemhead rollers (or bow rollers), are available in two sizes. With no holding pin they are more suitable for smaller vessels. The 2" model has a small lip to the front of the base. SKU Size... $291.06 Choose Options ×
Spartan Marine Hardware Manganese Bronze Chain Plate Made in the USA, these strong manganese bronze chain plates provide a number of options for deck-mounted rigging points on your boat. Cast and machined to accept large-diameter bolt-through fastenings for maximum strength. SKU Clevis Width Length... $49.09 Choose Options Spartan Marine Hardware Manganese Bronze Chain Plate - Lightweight Manganese bronze chain plates from Spartan Marine in the USA. These small burnished fittings provide robust deck mounting points for rigging and other purposes. They are particularly suited to shrouds and backstays. With a 1/4" clevis, these... $50.33 Choose Options Spartan Marine Hardware Manganese Bronze Combination Chain Plate $120.65 Choose Options Davey and Company Bronze Stemhead Fitting Strong cast bronze stem head fitting for loads associated with sailing dinghies up to around 18' in length. Note that this fitting is cast at an 85 ° angle and it is recommended to not attempt bending. These attractive fittings are made in... $77.51 Choose Options Davey and Company Bronze Eye Plates - Undrilled Solid bronze eye plates (or bowsprit plates) finished in either polished bronze or chrome-plated bronze. These eye plates are undrilled to allow holes to be aligned with structural members when fixing. Available in various sizes as detailed above,... $34.42 Choose Options Davey and Company Bronze Chain Plates - Undrilled Undrilled bronze chain plates (or bowsprit shroud plates) with a polished bronze finish. Cast in the United Kingdom, these beautifully made bronze shroud plates are undrilled. This allows the installer to drill holes to suit the vessel's strong points... $23.10 Choose Options Davey and Company Bronze Stemhead Fitting - Lightweight Cast bronze stem head fitting for sailing dinghies up to around 12' in length. Note that this fitting is cast at an 80° angle and it is recommended to not attempt bending. These attractive fittings are made in England and can be fastened with 4... $69.88 Choose Options Davey and Company Bronze Bow Roller Made in the UK, these quality bronze stemhead rollers (or bow rollers), are available in two sizes. With no holding pin they are more suitable for smaller vessels. The 2" model has a small lip to the front of the base. SKU Size... $291.06 Choose Options ×
Spartan Marine Hardware Manganese Bronze Chain Plate - Lightweight Manganese bronze chain plates from Spartan Marine in the USA. These small burnished fittings provide robust deck mounting points for rigging and other purposes. They are particularly suited to shrouds and backstays. With a 1/4" clevis, these... $50.33 Choose Options Spartan Marine Hardware Manganese Bronze Combination Chain Plate $120.65 Choose Options Davey and Company Bronze Stemhead Fitting Strong cast bronze stem head fitting for loads associated with sailing dinghies up to around 18' in length. Note that this fitting is cast at an 85 ° angle and it is recommended to not attempt bending. These attractive fittings are made in... $77.51 Choose Options Davey and Company Bronze Eye Plates - Undrilled Solid bronze eye plates (or bowsprit plates) finished in either polished bronze or chrome-plated bronze. These eye plates are undrilled to allow holes to be aligned with structural members when fixing. Available in various sizes as detailed above,... $34.42 Choose Options Davey and Company Bronze Chain Plates - Undrilled Undrilled bronze chain plates (or bowsprit shroud plates) with a polished bronze finish. Cast in the United Kingdom, these beautifully made bronze shroud plates are undrilled. This allows the installer to drill holes to suit the vessel's strong points... $23.10 Choose Options Davey and Company Bronze Stemhead Fitting - Lightweight Cast bronze stem head fitting for sailing dinghies up to around 12' in length. Note that this fitting is cast at an 80° angle and it is recommended to not attempt bending. These attractive fittings are made in England and can be fastened with 4... $69.88 Choose Options Davey and Company Bronze Bow Roller Made in the UK, these quality bronze stemhead rollers (or bow rollers), are available in two sizes. With no holding pin they are more suitable for smaller vessels. The 2" model has a small lip to the front of the base. SKU Size... $291.06 Choose Options ×
Spartan Marine Hardware Manganese Bronze Combination Chain Plate $120.65 Choose Options Davey and Company Bronze Stemhead Fitting Strong cast bronze stem head fitting for loads associated with sailing dinghies up to around 18' in length. Note that this fitting is cast at an 85 ° angle and it is recommended to not attempt bending. These attractive fittings are made in... $77.51 Choose Options Davey and Company Bronze Eye Plates - Undrilled Solid bronze eye plates (or bowsprit plates) finished in either polished bronze or chrome-plated bronze. These eye plates are undrilled to allow holes to be aligned with structural members when fixing. Available in various sizes as detailed above,... $34.42 Choose Options Davey and Company Bronze Chain Plates - Undrilled Undrilled bronze chain plates (or bowsprit shroud plates) with a polished bronze finish. Cast in the United Kingdom, these beautifully made bronze shroud plates are undrilled. This allows the installer to drill holes to suit the vessel's strong points... $23.10 Choose Options Davey and Company Bronze Stemhead Fitting - Lightweight Cast bronze stem head fitting for sailing dinghies up to around 12' in length. Note that this fitting is cast at an 80° angle and it is recommended to not attempt bending. These attractive fittings are made in England and can be fastened with 4... $69.88 Choose Options Davey and Company Bronze Bow Roller Made in the UK, these quality bronze stemhead rollers (or bow rollers), are available in two sizes. With no holding pin they are more suitable for smaller vessels. The 2" model has a small lip to the front of the base. SKU Size... $291.06 Choose Options ×
Davey and Company Bronze Stemhead Fitting Strong cast bronze stem head fitting for loads associated with sailing dinghies up to around 18' in length. Note that this fitting is cast at an 85 ° angle and it is recommended to not attempt bending. These attractive fittings are made in... $77.51 Choose Options Davey and Company Bronze Eye Plates - Undrilled Solid bronze eye plates (or bowsprit plates) finished in either polished bronze or chrome-plated bronze. These eye plates are undrilled to allow holes to be aligned with structural members when fixing. Available in various sizes as detailed above,... $34.42 Choose Options Davey and Company Bronze Chain Plates - Undrilled Undrilled bronze chain plates (or bowsprit shroud plates) with a polished bronze finish. Cast in the United Kingdom, these beautifully made bronze shroud plates are undrilled. This allows the installer to drill holes to suit the vessel's strong points... $23.10 Choose Options Davey and Company Bronze Stemhead Fitting - Lightweight Cast bronze stem head fitting for sailing dinghies up to around 12' in length. Note that this fitting is cast at an 80° angle and it is recommended to not attempt bending. These attractive fittings are made in England and can be fastened with 4... $69.88 Choose Options Davey and Company Bronze Bow Roller Made in the UK, these quality bronze stemhead rollers (or bow rollers), are available in two sizes. With no holding pin they are more suitable for smaller vessels. The 2" model has a small lip to the front of the base. SKU Size... $291.06 Choose Options ×
Davey and Company Bronze Eye Plates - Undrilled Solid bronze eye plates (or bowsprit plates) finished in either polished bronze or chrome-plated bronze. These eye plates are undrilled to allow holes to be aligned with structural members when fixing. Available in various sizes as detailed above,... $34.42 Choose Options Davey and Company Bronze Chain Plates - Undrilled Undrilled bronze chain plates (or bowsprit shroud plates) with a polished bronze finish. Cast in the United Kingdom, these beautifully made bronze shroud plates are undrilled. This allows the installer to drill holes to suit the vessel's strong points... $23.10 Choose Options Davey and Company Bronze Stemhead Fitting - Lightweight Cast bronze stem head fitting for sailing dinghies up to around 12' in length. Note that this fitting is cast at an 80° angle and it is recommended to not attempt bending. These attractive fittings are made in England and can be fastened with 4... $69.88 Choose Options Davey and Company Bronze Bow Roller Made in the UK, these quality bronze stemhead rollers (or bow rollers), are available in two sizes. With no holding pin they are more suitable for smaller vessels. The 2" model has a small lip to the front of the base. SKU Size... $291.06 Choose Options ×
Davey and Company Bronze Chain Plates - Undrilled Undrilled bronze chain plates (or bowsprit shroud plates) with a polished bronze finish. Cast in the United Kingdom, these beautifully made bronze shroud plates are undrilled. This allows the installer to drill holes to suit the vessel's strong points... $23.10 Choose Options Davey and Company Bronze Stemhead Fitting - Lightweight Cast bronze stem head fitting for sailing dinghies up to around 12' in length. Note that this fitting is cast at an 80° angle and it is recommended to not attempt bending. These attractive fittings are made in England and can be fastened with 4... $69.88 Choose Options Davey and Company Bronze Bow Roller Made in the UK, these quality bronze stemhead rollers (or bow rollers), are available in two sizes. With no holding pin they are more suitable for smaller vessels. The 2" model has a small lip to the front of the base. SKU Size... $291.06 Choose Options ×
Davey and Company Bronze Stemhead Fitting - Lightweight Cast bronze stem head fitting for sailing dinghies up to around 12' in length. Note that this fitting is cast at an 80° angle and it is recommended to not attempt bending. These attractive fittings are made in England and can be fastened with 4... $69.88 Choose Options Davey and Company Bronze Bow Roller Made in the UK, these quality bronze stemhead rollers (or bow rollers), are available in two sizes. With no holding pin they are more suitable for smaller vessels. The 2" model has a small lip to the front of the base. SKU Size... $291.06 Choose Options ×
Davey and Company Bronze Bow Roller Made in the UK, these quality bronze stemhead rollers (or bow rollers), are available in two sizes. With no holding pin they are more suitable for smaller vessels. The 2" model has a small lip to the front of the base. SKU Size... $291.06 Choose Options
