Categories

Mast, Boom & Gaff

Loading...
  • Bronze Spar Fitting

    Bronze Spar End

    Bronze spar ends in a range of sizes to suit different spar or boom widths. Manufactured in the UK, these fittings have an elegant design and suit most of our range of gaff saddles and mast fittings. NOTE - these fittings are designed to be let in (or...

    GBP101.60
  • Leathered Gaff Saddle

    Stainless Steel Bronze Gaff Saddle - Gunter

    The gunter leathered stainless steel High Peak Saddle is designed for use where the gaff peak angle is less than 10 degrees. Where the peak angle is greater than 40 degrees use a Conventional Gaff Saddle instead. Where the peak angle is...

    GBP175.60
  • Leathered Gaff Saddle

    Bronze Gaff Saddle - Gunter

    The gunter leathered bronze High Peak Saddle is designed for use where the gaff peak angle is less than 10 degrees. Where the peak angle is greater than 40 degrees use a Conventional Gaff Saddle instead. Where the peak angle is 10 to 40...

    GBP153.49
  • Gaff Saddle

    Bronze Gaff Saddle - High Peak

    The conventional leathered bronze High Peak Saddle is designed for use where the gaff peak angle is between 10 degrees and 40 degrees. Where the peak angle is greater than 40 degrees use a Conventional Gaff Saddle instead. Where the peak...

    GBP164.47
  • Stainless Steel Gaff Saddle - High Peak

    The conventional leathered stainless steel High Peak Saddle is designed for use where the gaff peak angle is between 10 degrees and 40 degrees. Where the peak angle is greater than 40 degrees use a Conventional Gaff Saddle instead. Where the peak...

    GBP176.97
  • Leathered Gaff Saddle

    Stainless Steel Gaff Saddle - Conventional

    The conventional leathered stainless steel gaff saddle is designed for use where the gaff peak angle is greater than 40 degrees. Where the peak angle is between 10 degrees and 40 degrees, use a High Peak Saddle instead. Where the peak angle is less...

    GBP168.21
  • Bowsprit Traveller

    Bronze Bowsprit Traveller with Plates - Leathered

    These bronze bowsprit travellers are fitted with plates for use with furling gear. The furler drum can be shackled to the traveller plates using a shackle. Bowsprit travellers are designed to slide along the forestay, and to secure the forestay to the...

    GBP134.47
  • Leathered Gaff Saddle

    Bronze Gaff Saddle - Conventional

    The conventional leathered bronze gaff saddle is designed for use where the gaff peak angle is greater than 40 degrees. Where the peak angle is between 10 degrees and 40 degrees, use a High Peak Saddle instead. Where the peak angle is less than 10...

    GBP155.32
  • Leathered Mast Traveller

    Bronze Mast Traveller - Leathered

    This elegant welded bronze ring fitting is leathered. Unleathererd mast travellers are also available. Bronze mast travellers are used on lug-rigged boats such as Iain Oughtred's Caledonian Yawl. The traveller controls the yard while hoisting and...

    GBP84.64
  • Mast Traveller

    Bronze Mast Traveller - Unleathered

    This elegant welded bronze ring fitting is unleathered. Leathererd mast travellers are also available. Bronze mast travellers are used on lug-rigged boats such as Iain Oughtred's Caledonian Yawl. The traveller controls the yard while hoisting and...

    GBP46.12
  • Wooden Parrell Beads

    Davey and Company

    Timber Parrel Beads - Black Locust

    Parrel beads are normally used to hold the jaws of a sliding gaff to the mast.  They can also be used as stoppers and decorative work. These parrel beads are turned from rot-resistant and extremely durable Black Locust timber and coated with linseed...

    GBP7.43
  • Boom Crutch Socket

    Davey and Company

    Bronze Boom Crutch Socket

    A solidly cast bronze boom crutch socket from Davey & Co, complete with drain hole.  Use this fittiing to lock a removable boom crutch in position within the cockpit. Available in a polished bronze finish, or chrome plated to match existing...

    GBP69.15
  • Wooden Parrel Beads

    Davey and Company

    Timber Parrel Beads

    Parrel beads are normally used to hold the jaws of a sliding gaff to the mast.   Our wooden parrel beads are turned from Ash and coated with linseed oil.  They are manufactured by Davey & Co. in England and are available in a range of...

    GBP2.20
  • Gaff Span Shackle

    Davey and Company

    Bronze Gaff Span Shackle

    Davey & Co. manufacture these gunmetal bronze gaff span shackles in a range of jaw widths.  This shackle attaches to the peak halyard span wire to tension the leech. The design of this bronze shackle ensures loads are spread to minimise wear of...

    GBP26.04
  • Bronze Boom End - Clew

    Davey and Company

    Bronze Boom End - Clew

    Gunmetal bronze clew boom end from Davey & Co.  This fitting fits over the end of the boom and has a double swivelling tang for roller reefing. Two #8 countershunk holes are pre-drilled for mounting to the boom.  The eye at the top of the...

    GBP73.06
  • Bronze Boom End - Tack

    Davey and Company

    Bronze Boom End - Tack

    Gunmetal bronze tack boom end from Davey & Co.  This fitting fits over the mast-end of the boom and has a square cutout measuring 13mm (1/2") and two #6 countershunk holes for mounting to the boom.  The spikes of Davey's goose-neck fittings...

    GBP42.98
  • Davey bronze sail cars

    Davey and Company

    Bronze Track Slides - Internal

    Bronze slides from Davey that are compatible with Davey's internal brass sail track. Available to suit 3/4" (19mm) and 1" (25mm) internal track, these slides are cast from gunmetal bronze. SKU Size Davey's Code 026025 3/4" (19mm) 1321/GM/S/19 ...

    GBP10.46
  • Brass mast track pictured with Davey's bronze slugs (sold separately)

    Brass Sail Track - Internal (per 90cm)

    Extruded brass track by Davey & Co.  This track is sold units of 90cm (such as 90, 180, 270cm etc.) and is supplied undrilled. Where more than 90cm is ordered we will attempt to dispatch in uncut lengths where the limits of the courier...

    GBP27.81
  • Internal brass slugs pictured with Davey's internal track (track sold separately)

    Davey and Company

    Brass Track Slides - Internal

    Brass slides from Davey that are compatible with Davey's internal brass track. Available to suit 5/8" (16mm) or 3/4" (19mm) track, these slides are formed from brass sheet.

    GBP6.06
  • External Brass Track by Davey & Co.

    Brass Track - External (per 90cm)

    Extruded brass track by Davey & Co.  This track is sold by 90cm lengths (such as 90, 180, 270cm etc.) and is supplied undrilled. Where more than 90cm is ordered we will attempt to dispatch in uncut lengths where the limits of the courier...

    GBP15.62