Categories

Deck Hardware

Loading...
  • MURRAY MW117 bronze sheet car with swivelling fairlead

    MURRAY - Traditional Winches & Marine Hardware

    Bronze Genoa Track Slide - Swivelling Fairlead

    Robust manganese bronze sheet track slides by New Zealand company MURRAY.  These popular fittings have been mounted to NZ-made vessels for many years and are in service around the world. The slides feature a rotating fairlead that adjusts to the...

    NZD253.83
  • Bronze Slide Stop - sprung

    MURRAY - Traditional Winches & Marine Hardware

    Bronze Spring Pin Stop Slide

    Robust manganese bronze stopper cars by MURRAY of New Zealand.   These track fittings consists of a bronze car with solid stainless steel pin for locking into position on compatible Ronstan or Harken 32mm x 6mm "T" track. The sprung locking pin...

    NZD62.60
  • Bronze track end stop

    MURRAY - Traditional Winches & Marine Hardware

    Bronze Track End Stop

    Robust manganese bronze track end caps MURRAY of New Zealand.   These track fittings are compatible with Ronstan and Harken 32mm x 6mm "T" track.   OverallHeight (A) HoleDiameter (B) OverallLength (C)        ...

    NZD61.61
  • MURRAY MW78 bronze sheet car with ring

    MURRAY - Traditional Winches & Marine Hardware

    Bronze Track Slide - Ring & Stop

    Robust manganese bronze sheet track slides by MURRAY of New Zealand.  These track fittings consists of a bronze car and ring with solid stainless steel pin for locking into position on compatible Ronstan and Harken 32mm x 6mm "T" track. The...

    NZD137.30
  • Rocna Anchor - Galvanised

    Rocna Anchors

    Rocna Anchor - Galvanised

    The Rocna anchor was designed by New Zealand sailor Peter Smith, who has been designing, building, and sailing boats since the early 1960’s. Over 100,000 nautical miles of cruising, Peter experienced the same anchoring problems that are still...

    NZD300.68 NZD334.09
  • Rocna Anchor - Stainless Steel

    Rocna Anchors

    Rocna Anchor - Stainless Steel

    Stainless steel Rocna anchors were designed by New Zealand sailor Peter Smith, who has been designing, building, and sailing boats since the early 1960’s. Over 100,000 nautical miles of cruising, Peter experienced the same anchoring problems that...

    NZD923.72 NZD1,026.35
  • Rocna Fisherman Anchor - Galvanised

    Rocna Anchors

    Rocna Fisherman Anchor - Galvanised

    The Rock Solid Fish & Dive Anchor Designed as a specialist anchor for fishermen and divers who run an increased risk of getting their anchor stuck on an undersea obstacle, the Rocna Fisherman features a shackle rail™ for...

    NZD300.68 NZD334.09
  • Rocna Vulcan Anchor - Galvanised

    Rocna Anchors

    Rocna Vulcan Anchor - Galvanised

    The new Vulcan anchor is Rocna’s first major design development since the launch of the highly successful and acclaimed Rocna anchor itself. Following on the success of the Rocna, designer Peter Smith was often approached by customers...

    NZD326.13 NZD362.38
  • Rocna Anchors Rocna Vulcan Anchor - Stainless Steel

    Rocna Anchors

    Rocna Vulcan Anchor - Stainless Steel

    The new Vulcan stainless steel anchor is Rocna’s first major design development since the launch of the highly successful and acclaimed Rocna anchor itself. Following on the success of the Rocna, designer Peter Smith was often approached...

    NZD1,743.75 NZD1,937.51
  • MURRAY Winch - MW1 in polished bronze finish

    MURRAY - Traditional Winches & Marine Hardware

    MURRAY Mini Winch (MW1)

    The smallest MURRAY winch available, this model is clean without any top cleat or hinged mounting plates (useful for mast or boom-mounting).  Constructed in New Zealand using manganese bronze, these compact winches are ideal halyard winches on...

    NZD605.12
  • MURRAY Winch MW1 with hinges in polished bronze finish

    MURRAY - Traditional Winches & Marine Hardware

    MURRAY Mini Winch - with Mounting Hinges (MW1H)

    The smallest MURRAY winch available, this model is has hinged mounting plates for mast or boom-mounting and using the winch as a halyard winch.   Constructed in New Zealand using manganese bronze, these compact winches are ideal halyard winches...

    NZD649.46
  • MURRAY Winch - MW1CX with top cleat

    MURRAY - Traditional Winches & Marine Hardware

    MURRAY Mini Winch - with Top Cleat (MW1C)

    The smallest MURRAY winch available, this model is has a top cleat but is without the hinged mounting plates (useful for mast or boom-mounting).  Constructed in New Zealand using manganese bronze, these compact winches are ideal halyard winches...

    NZD641.95
  • MURRAY - Traditional Winches & Marine Hardware

    MURRAY Minor Winch - with Top Cleat (MW4)

    The MW4 MURRAY winch comes complete with a top cleat. Constructed in New Zealand using manganese bronze, these compact winches are ideal halyard winches on yachts up to 45', and sheet winch on yachts up to around 30'. Like all MURRAY winches, the...

    NZD1,156.17
  • MURRAY - Traditional Winches & Marine Hardware

    MURRAY Winch - with Top Cleat (MW5)

    The MW5 MURRAY winch comes complete with a top cleat. Constructed in New Zealand using manganese bronze, these compact winches are ideal halyard winches and genoa/spinnaker sheet winches on yachts beyond 50'. Like all MURRAY winches, the...

    NZD1,311.30
  • MURRAY bronze winch MW6 with top cleat

    MURRAY - Traditional Winches & Marine Hardware

    MURRAY Massive Winch - with Top Cleat (MW6)

    The MW6 & MW6X MURRAY winches come complete with a top cleat and secured handle. Designed originally as a halyard winch for a 108' four-masted training ship, the MW6 is constructed in New Zealand using manganese bronze.  These compact winches...

    NZD2,024.92
  • MURRAY - Traditional Winches & Marine Hardware

    MURRAY Major Winch - with Top Cleat (MW8)

    The MW8 MURRAY winch is a versitile 2-speed winch that comes complete with a top cleat. Proven on historic racing yachts, the MW8 is suitable for short-handed cruising boats or yachts requiring high power ratios. It is constructed in New Zealand...

    NZD4,601.44
  • Replacement locking button for MURRAY MW1 Winch handles

    MURRAY - Traditional Winches & Marine Hardware

    Button & Spring Set for Murray MW1 Winch Handle (each)

    Replacement button and springs sets for MW1 MURRAY winch handles. These sets are manufactured by MURRAY in New Zealand.  They can be used to restore the locking button on MURRAY winch handles. The set comprises of three parts - the bronze...

    NZD30.85