Categories

Rocna Anchor - Stainless Steel

Rocna Anchor - Stainless Steel

$882.00 $980.00
(You save $98.00)
(No reviews yet) Write a Review
SKU:
ROC-ROCNA4SS
UPC:
718122599585

Description

Stainless steel Rocna anchors were designed by New Zealand sailor Peter Smith, who has been designing, building, and sailing boats since the early 1960’s. Over 100,000 nautical miles of cruising, Peter experienced the same anchoring problems that are still prevalent today – needing to carry a variety of anchors to suit various seabeds, yet still the anchors dragged and boaters felt insecure.

“Your anchor should provide you and your crew with reliability, security, and confidence,” says Peter. A lifetime of nautical experience worldwide was poured into an anchor – initially conceived for Peter’s own use – which became the Rocna.

Refer to the Rocna Anchor sizing guide and the fitting guide to ensure you get the correct anchor for your boat.

AN INDEPENDENTLY TESTED NEW GENERATION DESIGN

Peter’s solution consistently returns top results in objective and independent testing. Since its launch in 2004, the Rocna has led worldwide anchor tests as published in the likes of SAILYachting MonthlyPractical Boat OwnerVoile, and others. Because of the Rocna’s reliable and convincing performance against its competition, Rocna is trusted to be rock solid in the real world. You don’t need to take our word for it.

FOR ALL WHO NEED RELIABILITY FROM PERFORMANCE

Rocna anchors are performing in some of the world’s toughest locales, including Patagonia, Antarctica, Alaska, Greenland, Scotland – as well as enduring temperamental tropical weather. Rocna has “buy-in” from respected boaters whose opinions matter, from Steve Dashew to Jimmy Cornell. Southern lattitudes sailing pioneer Jérôme Poncet reports: “It took me years with many trials to achieve, in discovering the Rocna anchor, foolproof holding power…”

PRECISION SETTING

The roll-bar (A) ensures that the anchor always arrives at the ideal angle for penetration, and the setting skids (B) guide the fluke tip (C) which acts as a sharp chisel cutting into the seabed. With a third of the anchor’s weight on its fluke tip, an instant reliable set is ensured with every use.

Rocna Anchor - Original

ROCK SOLID HOLDING POWER

Of all anchor types, a concave fluke (D) gives the greatest resistance, and through clever design Rocna provides the largest fluke area possible. In very soft seabeds, this provides the holding power to secure your boat. On hard or weedy sea floors, Rocna’s chisel tip (C) ensures that it cuts through and bites deep.

MAXIMUM VERSATILITY

The Rocna is a true multi-purpose anchor that sets and holds in most seabeds, from soft mud to hard sand, clay, grass, and kelp.

RESISTANT TO WIND AND TIDE SHIFTS

A Rocna remains stable and buried, and does not roll out on reversal or veering of load, or if dragged beyond yield, providing enhanced security.

HIGHEST QUALITY BUILD AND FINISH

Compare the welds and finish on a genuine Rocna anchor to alternatives. We believe a top performing product should be built like one, and we spend a lot of time and resources on production and quality control procedures to ensure that this is the case.

HIGH TENSILE STEEL SHANK (E)

Rocna anchors are designed – and built – for strength and durability.

SELF-DEPLOYING AND SELF-RECOVERING

The Rocna shank is designed so the anchor self-launches and self-stows on the majority of bow-rollers, with the greatest possible reliability.

GUARANTEED FOR LIFE

Each Rocna anchor comes with a Lifetime Warranty against both breakage and bending in addition to manufacturing defects.

Part Number Size Suits Boat Length (refer to sizing guide) Fluke Area Recomended G40 Chain
ROC-ROCNA4SS 4kg 4-7m 460cm2 6mm (1/4")
ROC-ROCNA6SS 6kg 5-9m 590cm2 6mm (1/4")
ROC-ROCNA10SS 10kg 7-11m 795cm2 7mm (1/4")
ROC-ROCNA15SS 15kg 8-14m 1030cm2 8mm (5/16")
ROC-ROCNA20SS 20kg 9-16m 1140cm2 9mm (5/16")
ROC-ROCNA25SS 25kg 10-18m 1415cm2 10mm (3/8")
ROC-ROCNA33SS 33kg 12-22m 1695cm2 10mm (3/8")
ROC-ROCNA40SS 40kg 14-24m 1945cm2 11mm (7/16")
ROC-ROCNA55SS 55kg 16-26m 2300cm2 12mm (7/16")
ROC-ROCNA70SS 70kg 18-28m 2690cm2 14mm (1/2")
ROC-ROCNA110SS 110kg 20m+ (please enquire) 3330cm2 16mm (5/8")
ROC-ROCNA150SS* 150kg 20m+ (please enquire) 4470cm2 Please enquire
ROC-ROCNA200SS* 200kg 20m+ (please enquire) 5560cm2 Please enquire
ROC-ROCNA275SS* 275kg 20m+ (please enquire) 6510cm2 Please enquire

* Please call for price & availability on Rocna 150Kg + sizes